Chimney repair in Eastvale CA - solid brick and mortar from the crown down
Crumbling mortar, loose bricks or a lean you can see from the yard? We find the cause and fix it, not just the spot.
- Licensed and insured.
- Free quotes on site.
- Expect a reply within 1 business day.
Can your chimney be repaired, or does it need rebuilding?
Chimney repair in Eastvale, CA, from United Eastvale Concrete and Masonry fixes missing, loose or cracked brick and worn mortar joints, anywhere from repointing the joints to a partial or full rebuild, so your chimney is structurally sound again.
Most people call because mortar is falling out of the joints, a few bricks have worked loose or the chimney looks like it's leaning. The price turns on how far the damage goes, since a few worn joints are a tuckpointing job and a leaning stack is a rebuild, and on whether a new liner follows the brickwork. The schedule turns mostly on the size of the job and whether the city needs a permit for it. I'll look first, then your written estimate puts your own figure on it.
How do you know your chimney needs repair?
Mortar crumbling from the joints
You find sandy grit on the roof, or gaps where you could push a key into the joint between bricks. That usually means water has been working into the mortar, and the longer it goes, the more bricks lose their grip and a repointing job grows into a rebuild.
Loose or missing bricks
A brick that rocks when you touch it, or a gap near the top where one has fallen out, means the mortar holding it has let go. Left alone, the bricks around it follow, and a loose brick can drop onto the roof or into the yard.
Chimney leaning off straight
If the chimney tips away from the house or looks off when you line it up with a corner, the masonry has shifted. That usually means rebuilding at least that section, and a lean puts more strain on the brick below it the longer it stands.
Brick faces flaking off
Spalling, when the face of a brick flakes or pops off, leaves the soft inside of the brick open to water. Once enough faces go, fresh mortar won't hold the chimney together and it's time to talk about a rebuild.
How we handle chimney repair
The first question is whether your chimney can be repaired or has to be rebuilt, and I'll give you my answer once I've looked at it up close. For a repair, we cut out the worn mortar, pack the joints with fresh mortar and reset or replace any loose bricks. For a rebuild, we take the chimney down to sound brick and lay it back up course by course. If you need a new liner too, we fix the masonry first and reline after, because the liner makers' instructions call for the chimney to be checked for soundness and any defects repaired before a liner goes in.
Chimney trouble rarely stops at the chimney. If the walls or a planter have the same sandy joints, tuckpointing cuts out the old mortar and packs in new, and brick repair replaces single bricks that have cracked or broken. I can look at those on the same visit.
Repointing worn joints
This suits a chimney that stands straight with solid brick, where only the mortar is going. It's the smallest fix that stops water getting into the joints, so it's where I start when the brick allows it.
Partial rebuild
This suits a chimney where the top courses have loosened or shifted but the brick lower down is sound. We take it down to good brick and lay the top back up, so you keep the part that's still doing its job.
Full rebuild
This suits a chimney that leans or whose brick is breaking down all over. Patching brick that has already moved doesn't make it stand straight, so rebuilding is the honest fix.
Relining after the masonry
This suits a chimney whose flue liner is cracked or missing, or one getting a new appliance. The liner work comes once the brickwork is sound, never before it.
Get a written estimate for your chimney
Send the form and we'll get back to you within one business day to set a time. I come out, look at the chimney with you, then send a free written estimate with no pressure and no obligation.
(951) 416-3252- Based in
- Eastvale, CA 92880
- Hours
- Mon–Sun: 8 AM–9 PM
What happens after you call about your chimney
Here's how a chimney job runs from your first call to the final walk-through, and what you get in writing before you decide anything.
Call or send a request
Call (951) 416-3252 or use the form, and we'll get back to you to set a visit. We're open seven days a week, 8 AM to 9 PM.
I look at your chimney
I check the brick, the joints and the top of the chimney, then tell you whether I'd repair or rebuild and why. You get a written estimate with the work and the price, so you're deciding on paper, not on a guess.
We sort permits, then build
If you say yes, we settle any permit questions before work starts. Then our crew does the brickwork with me on site, and any relining follows once the masonry is sound.
Clean up and walk it
We clean up the roof, yard and driveway around the chimney. Then you walk the finished job with me before we call it done.
Why Eastvale homeowners call us about their chimneys
Working in Eastvale since 2021
I learned masonry on job sites under experienced masons, then started this business in Eastvale in 2021. We're best known for brick and block walls and for fixing worn mortar, which is most of what chimney repair comes down to.
Owner on site, own crew
I look at your chimney myself, and our own crew does the work with me on site running it. The person who told you repair or rebuild is the one watching each course go back up.
Licensed and insured, every job
We're licensed and insured. California's contractor licensing board describes masonry as the trade that lays brick, block, stone and fire brick for heat-resistant work, which is what a chimney is built from.
Straight answer at first visit
If your chimney needs a rebuild and not a patch, I'll tell you at the first look rather than repoint it and have you calling again. That answer goes in writing, so you can weigh it before you commit.
On a chimney, the fix has to deal with why the brick failed. Ask for a visit or call (951) 416-3252, and I'll come take a look.
Chimney repair and brick work in Eastvale
In Eastvale, the city's Building Safety Team issues permits for residential projects, reviews plans against the building codes California has adopted and inspects residential work as it goes. I don't assume a chimney job is permit-free, whether it's repointing or a rebuild, so we check with the city about your job and handle the permit paperwork when one's needed, before any work starts. If you'd like to ask yourself, the city's permit desk is at 951.703.4450 or permits@eastvaleca.gov.
We're based in Eastvale and work in many of the cities around it. The chimneys we're called to usually show the most wear at the top, the part standing highest above the roof, and we see the same worn joints and loose top courses on jobs in Jurupa Valley and Norco.
Questions about chimney repair in Eastvale
How much does chimney repair cost in Eastvale?
Across the US, chimney repair usually runs about $550 to $6,800 per job, from a cap and crown repair with waterproofing to a rebuild above the roofline. Where yours lands depends on how much brick is loose, whether it needs rebuilding and whether a liner follows. Your written estimate gives you the figure for your chimney.
What is the best way to tell if a chimney needs a rebuild instead of repointing?
One chimney guide says a partial or full rebuild is the right fix when worn mortar comes with shifted bricks, a lean, or flaking brick faces on more than 30% of the exposed surface. That's because fresh mortar in damaged masonry doesn't give it back its load-bearing strength. If the brick is straight and solid and only the joints are worn, repointing is usually enough.
Which chimney liner is best for an existing chimney?
For a chimney that's already built, stainless steel stays easy to fit, while clay tile is durable and cost-effective but can be hard to install, according to one home improvement guide. A poured cast-in-place liner makes a seamless, insulated flue. Liners for gas and oil appliances don't need insulation because their flue gases run cooler, but liners for wood or other solid fuel do.
How often should my chimney be inspected?
At least once a year, under the national fire safety standard chimney professionals follow, and that covers chimneys, fireplaces and vents, including chimneys serving a gas furnace. That yearly visit is when cleaning, maintenance and repairs get scheduled.
When do I need a Level 2 chimney inspection?
One chimney directory reads the national standard as making a Level 2 inspection, a deeper look than the yearly one, the minimum after a home sale, a fuel change, a new or replaced appliance, a malfunction, a chimney fire or other damage to the building. If any of those apply to your house, mention it when you call so I know to look closer.
What causes a gas chimney to stop venting properly?
Bird nests or other debris can block a gas chimney's flue and stop it from working. A modern furnace can also have trouble venting through a flue built for an older one. If you've replaced your furnace, tell me when I come out, because I'll want to look at the flue as well as the brick.
Other masonry work that goes with chimney repair
Tuckpointing
When the brick in your walls or chimney is solid but the mortar between it is sandy and crumbling, fresh joints keep water out and the bricks tight.
Brick repair
Cracked or broken bricks in a wall, step or planter can be cut out and replaced with a close match before the damage spreads further.
Chimney repair service areas around Eastvale
United Eastvale Concrete and Masonry is based in Eastvale, California, and does chimney repair in the 12 cities listed here, including Riverside and Rancho Cucamonga. If your city isn't on our pages, give us a call and ask.
Eastvale, CA
Have your chimney looked at in person
Call (951) 416-3252 or send the form, and tell us whether the chimney serves wood or gas and where you've seen cracks, loose bricks or a lean, so I know what to check first.