Masonry Contractor in Norco, CA - Block and Brick Walls Built for the Ground
United Eastvale Concrete and Masonry is a masonry contractor serving Norco, CA from Eastvale. We build block and brick walls, fix worn mortar, repair chimneys and lay driveways, walkways and outdoor kitchens for Norco homes.
- Licensed and insured.
- Free quotes on site.
- Expect a reply within 1 business day.
Norco properties as we see them on our jobs
Norco is a short drive from our base in Eastvale, and it doesn't look much like the newer tracts around it. A lot of homes here sit on bigger lots with long side and back property lines, corral fencing, and block walls that have stood for decades right next to ones put up last year. That mix means one week I'm looking at a tired garden wall with sandy mortar and the next we're building a backyard outdoor kitchen from scratch.
The ground matters as much as the house. With long runs of wall sitting on soil that can move, the footing and the steel inside the wall decide how long it lasts, so that's where we start on every Norco job.
Masonry services we handle for Norco homes
Foundation repair
Cracks in a slab or foundation wall on shifting Norco ground usually mean the footing moved, so we find out why it moved before we patch anything.
Chimney repair
A brick chimney that's leaning, cracked or dropping mortar is worth a look after any shake, because loose brick at the top can come down.
Tuckpointing
When the mortar joints on a brick house or wall have gone sandy, we grind them out and pack in fresh mortar so water stops getting behind the brick.
Brick repair
Broken bricks, or ones with the face flaking off, get cut out and replaced with a close match so the wall stays sound and still looks like itself.
Driveway pavers
Pavers on a packed base suit a long Norco driveway, because a single cracked paver lifts out and goes back without tearing up the whole drive.
Retaining wall construction
Graded backyards and slopes need retaining walls with real footings and drainage behind them, since water trapped behind a wall is what usually pushes it over.
Masonry restoration
Older brick and block around the property can be cleaned, repointed and rebuilt where it's failing, so you keep the original look instead of tearing it out.
Fireplace installation
We build masonry fireplaces indoors and out, with the firebox, the brick box the fire sits in, and the chimney sized so it draws the smoke up properly.
Stone veneer installation
Stone veneer dresses up a plain block wall, a house front or a fireplace, and we set it over proper backing so water drains out instead of sitting behind it.
Concrete block walls
Block walls line plenty of Norco property lines, and we build new ones with steel rebar and grout-filled cells so they stay standing through a shake.
Foundation block wall installation
For barns, workshops, garages and additions, we lay block foundation walls on the footing so the building above sits on something square, level and reinforced.
Outdoor kitchen masonry
Big Norco backyards have room for an outdoor kitchen, and we build the block base, the counters and the stone or brick finish to take sun and weather.
Walkway construction
We lay brick, stone and paver walkways from the driveway to the front door or out across the back of the lot, on a packed base so they stay flat.
Brick wall installation
A brick garden or entry wall gives a Norco front yard a solid edge, and we set the footing and steel before the first row of brick goes down.
Stone masonry
Natural stone walls, steps and planters suit the open feel of many Norco lots, and we lay them so the stone carries the weight, not the mortar.
Brick pointing
When a few joints have cracked or fallen out, brick pointing fills them with fresh mortar matched to the old, so small gaps don't turn into big repairs.
Get a free written estimate for your Norco masonry job
Send the form and you'll hear back within one business day. I'll come out, walk the job with you, then send a free written estimate. No pressure, no obligation.
(951) 416-3252- Based in
- Eastvale, CA 92880
- Hours
- Mon–Sun: 8 AM–9 PM
Working in Norco: permits, licenses and what sets the price
Norco's Building & Safety department issues the permits for building something new or for altering or enlarging what's already there, and when your job needs one, that comes before we dig, so it's the first thing that moves the schedule. Before you hire anyone, check two things. Their state contractor license should be active, and they should hold a Norco business license, which the city requires before anyone starts work here and which runs July 1 to June 30. We're licensed and insured, and we check with the city about your job and handle the permit paperwork when one's needed, before work starts.
Price on a Norco job usually comes down to how long and tall the wall is, how deep the footing has to go, whether an old wall comes out first, and how close we can get a truck to the work. A lot with a wide gate and an open side yard goes quicker than one where every block gets carried in by hand. We work the same way in Chino and the other cities around Eastvale, and the written estimate spells out what we're building before you decide.
Why Norco walls and chimneys crack and wear
Parts of Norco sit on thin alluvial soils, loose ground laid down by water, and the city's own code findings put those areas at a moderately high risk of liquefaction, where shaking turns wet soil soft. On that ground, a block wall without enough footing or rebar is the one that leans or splits, so we size the footing to the wall and grout steel into the cells instead of stacking block and hoping.
Sun, sprinkler spray and age do the rest. Mortar on an older wall goes sandy, water gets in behind the face, and the white crust on block is that water drying out, so we fix where the water comes from and repoint the joints instead of painting over it.
How a masonry job in Norco runs, start to finish
Here's how it goes from your first call to the final walk-through, with the estimate in writing before anything gets built.
Call or send a request
Call (951) 416-3252 or use the form and tell us what you're seeing. We'll set a time for me to come out, and photos help if you have them.
I walk the job with you
I come out myself, look at the wall or chimney, and tell you what I see and what I'd do. Then you get a free written estimate, so you know the cost before you commit to anything.
We sort out the permit
If you say yes, we handle any permit questions with the city before work starts. The city's building counter is open Monday to Thursday, 10 a.m. to 4 p.m., so we plan permit visits around those days.
Build, clean up, walk it
Our own crew does the work with me on site running it until it's cleaned up. Then we walk it together, and satisfaction is guaranteed on every job.
Questions about masonry work in Norco
Does a block wall or retaining wall in Norco need a building permit?
Low walls may not, but taller ones generally do. Under the city's proposed code, a masonry fence up to 3 feet tall and a retaining wall up to 2 feet, measured from the top of the footing to the top of the wall, need no building permit, but a retaining wall holding up a slope, a driveway or other load beyond level ground doesn't get that exemption at any height. We check with the city on every wall before we start, so you're not guessing.
When does a masonry contractor need a California state license?
A contractor needs a license from the Contractors State License Board when the job needs a building permit, uses employees, or comes to $1,000 or more in labor and materials. A bigger job can't be split into pieces under $1,000 to get around it, so most wall, chimney and paver jobs are licensed work. Ask any contractor for their license number before you sign.
What does a High fire hazard zone in Norco mean for my masonry project?
In Norco's High and Very High fire hazard zones, homeowners have to meet home hardening requirements, and new construction and renovations follow Wildland-Urban Interface building codes, the fire-safety rules for homes near open land. In a Very High zone, the city's guidance also calls for 100 feet of defensible space around structures. Brick, block and stone don't burn, which helps, but the details still have to follow the code, so we confirm your zone before we plan the job.
What causes block walls to crack in Norco?
Most cracked block walls come down to a footing that's too small, too little steel inside, or water and roots working on the base. Stair-step cracks along the mortar lines usually mean the ground under the wall moved, which on Norco's softer soils is the first thing I check. I'll tell you at the first visit if it needs a rebuild instead of a patch.
How do I know if my chimney needs repair or a rebuild?
Loose or missing mortar, a few cracked bricks or a cracked cap on top can usually be repaired, but a chimney that leans or pulls away from the house usually needs the top rebuilt. Flaking brick faces and white staining mean water is getting in, and that's what I'd fix first. Either way, I'll show you what I see before you decide.
How much does a block wall or masonry project cost in Norco?
The price depends on the length and height, the footing, any tear-out and the finish you pick, and you get it in writing after I've seen the job. If the work adds roof area, like a covered outdoor kitchen, the city's permit fee includes $0.02 per square foot of added roof area or its latest fee study rate. Brick or stone veneer over plain block and tight access both push the price up.
Eastvale, CA
Get your Norco wall or chimney looked at
Call (951) 416-3252 or send the form, because a crack caught while it's small is usually a repair, and the same crack left alone can turn into a rebuild.